? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. shielded power inductors C lps4012 document 433-1 document 433-1 revised 08/05/09 dcr srf i sat (a) 5 i rms (a) 6 inductance 2 max 3 typ 4 10% 20% 30% 20c 40c part number 1 (h) (ohms) (mhz) drop drop drop rise rise lps4012-331ml_ 0.33 20% 0.025 375 5.2 5.4 5.5 2.2 3.0 lps4012-681ml_ 0.68 20% 0.055 220 3.5 3.6 3.7 1.8 2.4 lps4012-102nl_ 1.0 30% 0.060 180 2.8 2.9 3.0 1.7 2.4 lps4012-152ml_ 1.5 20% 0.070 140 2.6 2.7 2.8 1.6 2.2 lps4012-222ml_ 2.2 20% 0.100 115 2.3 2.4 2.5 1.2 1.75 lps4012-332ml_ 3.3 20% 0.100 100 1.3 1.4 1.4 1.45 2.00 lps4012-472ml_ 4.7 20% 0.175 70 1.6 1.7 1.8 1.10 1.45 lps4012-562ml_ 5.6 20% 0.260 60 1.5 1.6 1.6 0.85 1.10 lps4012-682ml_ 6.8 20% 0.340 55 1.3 1.3 1.4 0.80 0.98 lps4012-103ml_ 10 20% 0.350 40 0.98 1.0 1.1 0.55 0.75 lps4012-153ml_ 15 20% 0.550 30 0.79 0.82 0.84 0.53 0.73 lps4012-223ml_ 22 20% 0.600 25 0.74 0.78 0.79 0.52 0.70 lps4012-333ml_ 33 20% 0.825 22 0.45 0.47 0.48 0.46 0.61 lps4012-473ml_ 47 20% 1.40 19 0.35 0.37 0.38 0.40 0.52 lps4012-683ml_ 68 20% 1.70 15 0.30 0.32 0.33 0.35 0.46 lps4012-104ml_ 100 20% 2.40 12 0.24 0.26 0.27 0.30 0.40 lps4012-124ml_ 120 20% 3.30 11.5 0.23 0.24 0.25 0.27 0.36 lps4012-154ml_ 150 20% 3.50 10.0 0.21 0.22 0.23 0.25 0.32 lps4012-184ml_ 180 20% 5.00 8.0 0.18 0.19 0.20 0.23 0.29 lps4012-224ml_ 220 20% 5.20 7.0 0.15 0.16 0.17 0.21 0.27 lps4012-334ml_ 330 20% 7.20 7.0 0.14 0.14 0.15 0.17 0.225 lps4012-474ml_ 470 20% 10.0 4.0 0.10 0.11 0.12 0.13 0.175 lps4012-564ml_ 560 20% 12.5 3.5 0.10 0.105 0.115 0.11 0.140 lps4012-684ml_ 680 20% 13.5 3.0 0.10 0.105 0.110 0.11 0.135 lps4012-824ml_ 820 20% 20.0 3.0 0.090 0.095 0.095 0.105 0.132 lps4012-105ml_ 1000 20% 21.5 3.0 0.080 0.090 0.095 0.100 0.130 lps4012-155ml_ 1500 20% 30.0 2.5 0.080 0.090 0.090 0.087 0.115 lps4012-185ml_ 1800 20% 35.0 2.0 0.079 0.085 0.087 0.075 0.100 lps4012-225ml_ 2200 20% 42.0 1.0 0.079 0.083 0.085 0.070 0.090 lps4012-335ml_ 3300 20% 65.0 0.95 0.074 0.078 0.080 0.050 0.065 1. please specify termination and packaging codes: lps4012-682m lc termination: l = rohs compliant silver-palladium- platinum-glass frit. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (1000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d =13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (3500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms using an agilent/hp 4192a. inductance at 1 mhz is the same for parts with srf 10 mhz. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 8753es or equivalent. 5. dc current that causes the specified inductance drop from its value without current. 6. current that causes the specified temperature rise from 25c ambient. 7. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering. core material ferrite core and winding loss see www.coilcraft.com/coreloss terminations rohs compliant silver-palladium-platinum-glass frit. other terminations available at additional cost. weight 54 ? 64 mg ambient temperature ?40c to +85c with i rms current, +85c to +125c with derated current storage temperature component: ?40c to +125c. packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 1000/7 reel; 3500/13 reel plastic tape: 12 mm wide, 0.25 mm thick, 8 mm pocket spacing, 1.32 mm pocket depth recommended pick and place nozzle od: 4 mm; id: 2 mm pcb washing only pure water or alcohol recommended ? very low dcr; excellent current handling ? 4.0 4.0 mm footprint; less than 1.2 mm tall
? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. shielded smt power inductors C lps4012 series document 433-2 document 433-2 revised 08/05/09 typical l vs current typical l vs frequency 0.1 1 10 10000 1000 100 0.01 0.1 110 current (a) inductance (h) 1 h 2.2 h 10 h 22 h 220 h 100 h 1000 h 2200 h 5.6 h 0.01 0.1 110 inductance (h) 0.01 0.1 110 frequency (mhz) 1 h 10 h 2.2 h 22 h 5.6 h 0.1 1 10 10000 1000 100 220 h 100 h 1000 h 2200 h -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) percent of rated current 120 110 100 90 80 70 60 50 40 30 20 10 0 i sat i rms 25c current derating 0.1535 0.003 3,90 0,076 0.1535 0.003 3,90 0,076 0.0433 0.004 1,10 0,10 0.060 1,52 winding direction dash number internal code xxx x 0.173 4,40 0.123 3,124 recommended land pattern 0.060 1,50 0.118 3,00 0.173 4,40 0.028 0,70 45 typ 0.090 2,30 0.123 3,124 0.090 2,30 * * dimensions are of the case not including the termination. for maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. * coilcraft designer?s kit c392 contains samples of 0.80 h to 33 h parts (3 each) from lps3008, lps3010 and lps3015. kit c401 contains samples of 0.56 h to 33 h parts (3 each) from lps4012 and lps4018. kit c402 contains samples of 220 h to 3300 h parts (3 each) from all five series. for details of kit contents and to order, contact coilcraft or visit http://order.coilcraft.com . dimensions are in inches mm
|
